LEONA™ is highly strong and has excellent heat resistance. In addition, LEONA™ excels in rubber adhesiveness. LEONA™ is used as an industrial material. It is mainly used for automotive products.

more

NEOMA^®FOAM is the foam with excellent heat insulation, flame resistance, as well as workability and achieves lightweight and high strength in a balanced manner. It contributes to weight reduction and higher functionality in various parts of automobiles.

more

The DELPET™ light diffusion/scattering material series offers a wide selection of diffusion and scattering patterns which improve vehicle or product appearance, eliminate glare, reduce the number of LEDs, and contribute to space saving as well as cost reduction.

more

With the increasing importance of environmental protection and with stricter regulations on CO₂ emissions as well as fuel efficiency, the weight reduction of automobiles is becoming more and more important. Continuous Glass Fiber Reinforced Polyamide Resin (Continuous Glass Fiber) takes full advantage of the features of reinforced resin, this material has excellent strength, rigidity, and impact resistance. Therefore, the polyamide resin can be considered as an alternative to metals and contributes to the need for weight reduction.

more

We provide a polymer alloy with various properties by processing polyphenylene ether resin, which features a low specific gravity, flame retardancy, and heat resistance, with our unique compound technology. An example of usage: resinifying secondary battery peripheral parts.

more

Leona™ is a material which, in combination with suction blow molding, provides excellent resistance to heat aging (up to 230ºC) and stable formability for turbo ducts, which are required for long-lasting heat resistance. Leona™ material can also be used in cooling pipe for batteries, inverters, and other parts that require hydrolysis resistance.

more

ASACLEAN™ significantly reduces switching time, amount of waste, and CO₂ emissions. Based on Asahi Kasei's resin compatibilization technology and original compounding technique, it achieves the world's highest level of cleaning performance. Asahi Kasei proposes the optimal removal of resins ranging from general-purpose resins such as PP and ABS to super engineering plastics such as PEEK and PPS. ASACLEAN™ is also suitable for removing our Leona™ (PA66), Xyron™ (m-PPE), TENAC™ (POM), and DELPET™ (PMMA).

more

In addition to having excellent polarization properties in a wide wavelength range, this polarizing film is characterized by both easy workability (easy lamintation, bending, profile cut, etc.) and excellent heat resistance stability.

more

Polyamide resins are known as plastics with excellent properties such as excellent resistance to heat, abrasion and chemicals. Polyamide foams are made by foaming polyamide-based resins. They are expected to be used in applications such as automotive parts and electrical products. They make it possible to reduce the weight of these parts and products, yet retain excellent properties such as resistance to heat, abrasion, and chemicals.

more

We provide A/D converters, which are pin compatible products, for microphones. AK5734 is a 4-channel and AK5736 is a 6-channel ADC. Combining the former with the latter allows them to be compatible with systems with various number of microphones.

more

Using Cubit™ as the base material of instrument panels and armrests can contribute to soft texture. This material can be used to replace urethane which contributes to light-weighting.

more

Asahi Kasei has modified the conventional polyacetal resin to take on metallic colors while achieving low VOC emission. This contributes to significant cost reduction by eliminating plating and coating process as well as reducing nagative impact on the environment. The resin also has weather resistant property.

more

The DELPET™ PB series is an acrylic resin which maintains a high ebony property for a long period of time. It meets requirements such as high fluidity and solvent resistance, has a wide range of grades, and is optimal for bodywork on vehicle exteriors.

more

LASTAN^® has higher flame retardancy than most other organic non-woven fabrics. Even in case of fire, LASTAN^® does not easily burn and blocks heat as well as flames due to various post-processing methods applied to it. With its soft and supple texture, it is highly regarded as an optimal material that meets the needs related to disaster prevention, safety, and industrial materials.

more

Precisé™ is a polyester nonwoven fabric with a three-layer structure containing an ultrafine fiber layer. Therefore, it is a material that contributes to sound management without enlarging the existing space.

more

Dinamica^® is artificial leather that is the fruit of environmentally friendly technologies. Its unique tri-layer structure composed of ultra-fine short fiber and water-based polyurethane expands its potential as a material.

more

While SunForce™ features properties unique to foams, such as light weight and heat insulation, it surpasses conventional foams in functions such as heat retardance, dimensional stability, and thin-wall molding. SunForce™ allows for a wide range of proposals tailored to requirements related to product or part design.

more

These are additives suitable for improving key properties such as flexibility, abrasion resistance, soft-touch feeling, etc., which are required for automotive interior parts.

more

Polyamide 66-based powder under development for Powder Bed Fusion (PBF) 3D printers. It's high plasticity and heat resistance contributes to significant design freedom by materializing unprecedented shapes.

more

Our unique nanocomposite materials are composites of highly heat-resistant cellulose nanofiber (CNF) and various polyamide resins. The materials excel in rigidity, dimensional stability, as well as sliding properties, and are expected to be applied to various sliding parts. They also contribute to reducing the environmental impact of parts since they utilize biomaterials, have high mechanical recyclability, and reduce the weight of parts.

more

AK7707 is a multi-core DSP equipped with six stereo sampling rate convertors (SRC). It supports sampling frequency of up to 192kHz and comes with DIR / DIT. AK7707 is equipped with two types of DSPs for processing audio and voice signals.Changing programs allows the DSP to process a wide variety of audio and voice signals. The DSP enables processing related to high-performance hands-free devices, in-vehicle communication, active sound design (ASD), various audio signals, etc.

more

MEF™ stands for "Moldable PolyEthylene Foam" Being inherently light and flexible, PE foam offers exceptional shock absorption and durability. As it is molded by steam chest molding, it can be formed into different shapes and sizes easily, and is suitable for automotive parts (especially for car interiors). It is also suitable for returnable packaging in shipping of automotive parts.

more

The special polymer design of Leona™ SV series enhances the damping effect of vibration and sound compared to general polyamide 66 resin. Blending glass fiber can improve its strength and rigidity higher.

more

Integrated processing using multiple materials such as spunbonded non-woven fabric, knee panfelt, and woven fabric is possible. Shape cutting, punching, sewing, etc. are possible according to the needs of each airbag manufacturer.

more

PULSHUT™ is a thin, lightweight electromagnetic Noise Suppression Sheet(NSS) that contributes to EMC measures.

more

This technology senses the driver's pulse with a camera and calculates the pulse rate.

more

PTT not only features high quality and excellent shape recovery properties, but also is environmentally friendly.

more